View 67-03-BHGHR6W-B11-2T-MS_267404.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS
Features
P-LCC-4 package. White package and black surface. Optical indicator. Ideal for backlight and light pipe application. Inter reflector. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Available on tape and reel (8mm Tape). Pb-free. The product itself will remain with RoHS compliant version
Descriptions
The 67-03 series is available in soft orange, green, blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium.
Applications
Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD's, switches and symbols. Light pipe application. General use.
Device Selection Guide
Chip Emitted Color Type R6 GH BH Material AlGaInP InGaN InGaN Brilliant Red Brilliant Green Blue White Diffuse Resin Color
Everlight Electronics Co., Ltd. Device No. DSE-0000547
http://www.everlight.com Prepared date: 15-Dec-2008
Rev. 1
Page: 1 of 14
Prepared by: Josh Chou
Revision
:1
Release Date:2008-12-17 10:03:15.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS
Package Outline Dimensions
Notes: 1. All dimensions are in millimeters 2. Tolerance unless mentioned is 0.1mm
Everlight Electronics Co., Ltd. Device No. DSE-0000547
http://www.everlight.com Prepared date: 15-Dec-2008
Rev. 1
Page: 2 of 14
Prepared by: Josh Chou
Revision
:1
Release Date:2008-12-17 10:03:15.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS
Absolute Maximum Ratings (Ta=25
Parameter Reverse Voltage
)
Symbol VR R6 Rating 5 50 25 25 100 100 100 120 95 95 2000 2000 2000 V mW mA mA Unit V
Forward Current
IF
GH BH R6
Peak Forward Current (Duty 1/10 @ 1KHz)
IFP
GH BH R6
Power Dissipation
Pd
GH BH R6
Electrostatic Discharge(HBM)
ESD Topr Tstg
GH BH
Operating Temperature Storage Temperature
-40 ~ +85 -40~ +90 Reflow Soldering : 260 Hand Soldering : 350 for 10 sec. for 3 sec.
Soldering Temperature
Tsol
Everlight Electronics Co., Ltd. Device No. DSE-0000547
http://www.everlight.com Prepared date: 15-Dec-2008
Rev. 1
Page: 3 of 14
Prepared by: Josh Chou
Revision
:1
Release Date:2008-12-17 10:03:15.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS
Electro-Optical Characteristics (Ta=25
Parameter Symbol R6 Luminous Intensity IV GH BH R6 Peak Wavelength p GH BH R6 Dominant Wavelength d GH BH Spectrum Radiation Bandwidth R6 GH BH R6 Forward Voltage VF GH BH Viewing Angle 21/2 R6 Reverse Current IR GH BH Min. 210 575 210 ------------618 524 466.5 ------------1.75 2.9 2.9 -----------------
)
Typ. ------------632 518 468 ------------20 35 35 ------------120 ------------Max. 300 825 300 ------------627 531.5 474 ------------2.35 3.5 3.5 ----10 50 50 A VR=5V deg IF=20mA V IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA mcd IF=20mA Unit Condition
Note: 1. Tolerance of Luminous Intensity: 10% 2. Tolerance of Dominant Wavelength: 1nm 3. Tolerance of Forward Voltage: 0.1V
Everlight Electronics Co., Ltd. Device No. DSE-0000547
http://www.everlight.com Prepared date: 15-Dec-2008
Rev. 1
Page: 4 of 14
Prepared by: Josh Chou
Revision
:1
Release Date:2008-12-17 10:03:15.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS
Bin Range of Luminous Intensity
Symbol Bin Code 5a R6 5b 6a 6b 10b Iv GH 11a 11b 12a 5a BH 5b 6a 6b Note: 1. Tolerance of Luminous Intensity: 10% Min. 210 230 252 275 575 630 690 756 210 230 252 275 Max. 230 252 275 300 630 690 756 825 230 252 275 300 mcd IF =20mA Unit Condition
Everlight Electronics Co., Ltd. Device No. DSE-0000547
http://www.everlight.com Prepared date: 15-Dec-2008
Rev. 1
Page: 5 of 14
Prepared by: Josh Chou
Revision
:1
Release Date:2008-12-17 10:03:15.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS
Bin Range of Dominant Wavelength
Symbol Bin Code R1 RS R2 R3 G1 d GB G2 G3 B1 B7 B2 B2 Min. 618 621 624 524 526.5 529 466.5 469 471.5 Max. 621 624 627 526.5 529 531.5 469 471.5 474 nm IF =20mA Unit Condition
Bin Range of Forward Voltage
Symbol Bin Code 0 RS 1 2 11 VF GB 12 13 11 B7 12 13 Note: 1. Tolerance of Dominant Wavelength: 1nm 2. Tolerance of Forward Voltage: 0.1V Min. 1.75 1.95 2.15 2.90 3.10 3.30 2.90 3.10 3.30 Max. 1.95 2.15 2.35 3.10 3.30 3.50 3.10 3.30 3.50 V IF =20mA Unit Condition
Everlight Electronics Co., Ltd. Device No. DSE-0000547
http://www.everlight.com Prepared date: 15-Dec-2008
Rev. 1
Page: 6 of 14
Prepared by: Josh Chou
Revision
:1
Release Date:2008-12-17 10:03:15.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS
Typical Electro-Optical Characteristics Curves (BH)
Spectrum Distribution 100 Relative luminous intensity (%) 75 Ta=25C IF (mA) 50 40 30 20 10 0 Forward Current vs. Forward Voltage Ta=25C
50 25
0 400
Forward Current
450 500 550 Wavelength (nm)
600
2.6
2.8
3.2
3.6
4.0
Forward Voltage V F (V) Relative Luminous Intensity vs. Forward Current Ta=25C
f=1KHz Duty=1/10
Relative luminous intensity (%)
Relative luminous intensity (%)
1000
Relative Luminous Intensity vs. Ambient Temperature
1000
100
100
10
10
1 -40 -20
0
20 40
60 80 100
10 10
10
1
10
2
10
3
Ambient temperature Ta (c) Forward Current Derating Curve 50 IF (mA) 40 30 20 10 0 0 20 40 60 80 100 Ambient temperature Ta (c) 1.0 0.9 0.8 0.7 0.5
Forward current I F (mA) Radiation Diagram 0 10 Ta=25C 20 30
Forward Current
40 50 60 70 80 90 0.3 0.1 0.2 0.4 0.6
Everlight Electronics Co., Ltd. Device No. DSE-0000547
http://www.everlight.com Prepared date: 15-Dec-2008
Rev. 1
Page: 7 of 14
Prepared by: Josh Chou
Revision
:1
Release Date:2008-12-17 10:03:15.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS
Typical Electro-Optical Characteristics Curves (GH)
Spectrum Distribution Relative luminous intensity (%) IF (mA) 100 75 50 25 Ta=25C 50 40 30 20 10 0 2.4 Forward Current vs. Forward Voltage
Ta=25C
0 400
450 500 550 Wavelength (nm)
600
Forward Current
2.6
2.8
3.2
3.6
4.0
Forward Voltage VF (V) Relative Luminous Intensity vs. Forward Current Ta=25C Relative luminous intensity (%) 1000
f=1KHz Duty=1/10
Relative luminous intensity (%)
1000
Relative Luminous Intensity vs. Ambient Temperature
100
100
10
10
1 -60 -40 -20
0 20 40 60 80 100
10 10
10
1
10
2
Ambient Temperature Ta (C)
Forward Current
IF(mA) Ta=25C 20 30
Radiation Diagram 0 IF (mA) 50 40 30 20 10 0 0 20 40 60 80 100 1.0 0.9 0.8 0.7 0.5 0.3 0.1 0.2 10
Forward Current
40 50 60 70 80 90 0.4 0.6
Ambient Temperature Ta (C)
Everlight Electronics Co., Ltd. Device No. DSE-0000547
http://www.everlight.com Prepared date: 15-Dec-2008
Rev. 1
Page: 8 of 14
Prepared by: Josh Chou
Revision
:1
Release Date:2008-12-17 10:03:15.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS
Typical Electro-Optical Characteristics Curves (R6)
Spectrum Distribution Relative luminous intensity (%) 100 75 Ta=25C Forward Current I F (mA) Forward Current vs. Forward Voltage
50 40 30 20 10 0
1.2 1.6 2.0 2.4
Ta=25C
50 25
0 550
600 650 700 Wavelength (nm)
750
2.8
3.0
Forward Voltage VF (V) Relative Luminous Intensity vs. Forward Current Ta=25C Relative luminous intensity (%) 1000
f=1KHz Duty=1/10
Relative Luminous Intensity vs. Ambient Temperature Relative luminous intensity (%) 1000
100
100
10
10
1 -60 -40 -20
0 20 40 60 80 100
10 10
Ambient Temperature Ta (C) Forward Current Derating Curve 60 Forward Current I F (mA) 50 40 30 20 10 0 0 20 40 60 80 100 1.0 0.9 0.8 0.7
10 10 Forward Current I F (mA) Radiation Diagram 0 10
1
2
10
3
Ta=25C 20 30
40 50 60 70 80 90 0.5 0.3 0.1 0.2 0.4 0.6
Ambient Everlight Electronics Co., Ltd. Temperature Ta(C) http://www.everlight.com
Rev. 1
Page: 9 of 14
Device No. DSE-0000547
Prepared date: 15-Dec-2008
Prepared by: Josh Chou
Revision
:1
Release Date:2008-12-17 10:03:15.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS
Label Explanation
Pb
CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank
EVERLIGHT
RoHS
CAT : XXX HUE : XXX REF : XXX
CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX
REF: Forward Voltage Rank
QTY : XXX
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
MADE IN TAIWAN
Reel Dimensions
Note: Tolerance unless mentioned is 0.1mm; Unit = mm
Everlight Electronics Co., Ltd. Device No. DSE-0000547 http://www.everlight.com Prepared date: 15-Dec-2008 Rev. 1 Page: 10 of 14
Prepared by: Josh Chou
Revision
:1
Release Date:2008-12-17 10:03:15.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS
Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel.
+
Note: Tolerance unless mentioned is 0.1mm; Unit = mm
Moisture Resistant Packaging
Label
Aluminum moistue-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd. Device No. DSE-0000547
http://www.everlight.com Prepared date: 15-Dec-2008
Rev. 1
Page: 11 of 14
Prepared by: Josh Chou
Revision
:1
Release Date:2008-12-17 10:03:15.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS
Reliability Test Items and Conditions
The reliability of products shall be satisfied with items listed below. Confidence level 90% LTPD 10% Test Hours/Cycles 6 Min. 300 Cycles Sample Size 22 PCS.
No. 1
Items Reflow Soldering
Test Condition Temp. : 260 5 5sec. H : +100 5 min L : -40 H : +100 15min 5min Min.
Ac/Re 0/1
15min 22 PCS. 0/1
2
Temperature Cycle
3
Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
10 sec L : -10 5min
300 Cycles
22 PCS.
0/1
4 5 6 7
Temp. : 100 Temp. : -40 IF = 20 mA 85 / 85%RH
1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.
22 PCS. 22 PCS. 22 PCS. 22 PCS.
0/1 0/1 0/1 0/1
Everlight Electronics Co., Ltd. Device No. DSE-0000547
http://www.everlight.com Prepared date: 15-Dec-2008
Rev. 1
Page: 12 of 14
Prepared by: Josh Chou
Revision
:1
Release Date:2008-12-17 10:03:15.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS
Precautions for Use
1. Over-current-proof Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile
1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C 60 Sec. Max. Above 220C
120 Sec. Max.
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. Device No. DSE-0000547
http://www.everlight.com Prepared date: 15-Dec-2008
Rev. 1
Page: 13 of 14
Prepared by: Josh Chou
Revision
:1
Release Date:2008-12-17 10:03:15.0 Expired Period: Forever
LifecyclePhase:
Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS
4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. DSE-0000547
Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Rev. 1 Page: 14 of 14
http://www.everlight.com Prepared date: 15-Dec-2008
Prepared by: Josh Chou
Revision
:1
Release Date:2008-12-17 10:03:15.0 Expired Period: Forever
LifecyclePhase:

▲Up To Search▲

Price & Availability of 67-03-BHGHR6W-B11-2T-MS

	To Download 67-03-BHGHR6W-B11-2T-MS Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .